-
USB cable and port
The USB 3.0 cable is used to connect the MinION Mk1B device to the host computer.
The crimped connecter end is attached to the USB 3.0 port on the MinION Mk1B and the flat end attaches to a USB 3.0 port on the host computer.
-
LEDs
When the MinION Mk1B is connected, lights will be visible through the side of the MinION Mk1B and may be flashing.
-
To power on the MinION Mk1C
Use the AC/DC adapter included with the device to power the MinION Mk1C.
Please see the Power section of the MinION Mk1C protocol.